When cleaning machine series configuration sprocket gear, post code for DT (eg 70000 / DT) synchronous tooth plate professional processing, arranged in series, load lines are parallel, radial and axial load evenly shared by the bearings. However, acting on the bearing set can only bear axial load in one direction. If the axial load gear machining in the opposite direction, or if combined loads, it is necessary to add a relatively tandem pair of third bearings bearing adjustment. This configuration can also be a series of three or more of the supporting bearing in place, but only in one direction axial load. Generally, in order to balance and limit the shaft axial displacement, the other support to be installed at the other direction can withstand axial load bearing. Structural deformation kind of double row angular contact ball bearings can be characterized withstand the combined load of radial and axial load, limiting both the axial displacement of the shaft. Compared with two-way thrust ball bearings, which bearing high speed limit, the contact angle of 32 degrees, rigid, and can withstand the overturning moment large, widely used in cars in the front wheels (some models also use the same size double row tapered roller bearings). Cleaning machine sprocket gear, gear, along GF bearing Electromechanical provided by Shenzhen-bearing Electrical Co., Ltd., Guangdong Development. Shenzhen City, Guangdong Development Bearings Electrical Co., Ltd. (www.sgfzc.com) (www.sgfzc.com) strong, credible, in other industries in Shenzhen, Guangdong has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Shun GF bearing Electrical and you hand into the brilliant, for a better future!