Angular contact ball bearings Single row angular contact ball bearings can withstand axial load in one direction, while the radial load on freshwater silver rail slider, will cause additional axial force. And the only limit the axial displacement in one direction of shaft or housing. Angular contact ball bearing contact angle of 40 degrees Pingshan ball screw rail agency, it can withstand large axial load. Angular contact ball bearings are non-separable design, the shoulder on both sides of the inner and outer rings uneven. In order to improve the load bearing capacity of the rail, which will lower the shoulder side of the Daya Bay machined silver rails on the slider, so that the bearings can put more balls. If the bearing inner and outer ring between the angle of inclination, will affect the life of the bearing, also causing loss of precision bearings running, running noise increases. Double row angular contact ball bearings generally use nylon cage or solid brass cage. When the double row angular contact ball bearing installation should be noted that although two-way bearings can withstand axial load, but if one side of the ball gap, you should be careful not to let the main axial load side of the gutter through the gap. Should pay attention to the bearings in the side without the ball gap raceway withstand major loads. Huiyang District, silver slide rails | rails | Shun GF bearing electromechanical provided by Shenzhen-GF bearing Electrical Co., Ltd.. Shenzhen City, Guangdong Development bearing Electrical Co., Ltd. (www.sgfzc.com) (www.sgfzc.com) strong, credible, in other industries, Guangdong Shenzhen accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Shun GF bearing Electrical and you hand into the brilliant, for a better future!