Double row angular contact ball bearings can withstand greater radial load mainly radial and axial joint load and moment load, axial displacement limit both axes. Mainly used to limit the shaft and housing bi-axial displacement of the components within the double row angular contact ball bearings, the outer ring between the tilt is limited, depending on the tilt angle allows the bearing internal clearance, bearing size, interior design and acting on forces and moments on the bearings, and the maximum allowable tilt angle should ensure the bearing does not generate excessive additional stress. Pairs of double ball bearing If paired install seat belt bearing UCF316 spot, make a pair of bearing outer ring relative to imported high-speed bearings R-144ZZ, namely the wide end bearing face of wide and narrow side facing the narrow end. This can avoid additional axial force, and the shaft or housing to limit the axial clearance range in both directions. Its inner and outer ring raceway relative displacement on the horizontal axis, so it can bear radial load and axial load - combined load (single row angular contact ball bearings can withstand axial load in one direction, so often paired installation). Imported high-speed bearings R-2zz, bearings, bearing along GF electromechanical provided by Shenzhen-GF bearing Electrical Co., Ltd.. Shenzhen City, Guangdong Development bearing Electrical Co., Ltd. (www.sgfzc.com) (www.sgfzc.com) strong, credible, in other industries, Guangdong Shenzhen accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Shun GF bearing Electrical and you hand into the brilliant, for a better future!